An industry first developed by Superior Doors; our steel doors are designed for applications where the highest rigidity in a door is required.
These doors primary use is in cavity sliders and other sliding applications where space is tight and doors must stay very straight to avoid scrapping or jamming.
There also perfect for locations such as between and internal garage and living space where the temperature and humidity can be very different either side of the door.
Steel x1 Door Specifications - 610-910x1980mm
EPS Solid Core
High Density Solid Core Polystyrene
Up to 98% Glue Contact area
Will not delaminate after impact
Enhanced thermal qualities
LockBlock
398x68mm Finger Jointed Pine
Rails & Stiles
Rails : 60mm Finger Jointed Pine
Stiles : 30mm Finger Jointed Pine
Steel Insert
Custom designed and precision engineered
Anti corrosive pre galvanised steel
38.1 x 29.9mm with 1.6mm wall thickness for added rigidity
Steel x2 Door Specifications - 610-910x1980mm
EPS Solid Core
High Density Solid Core Polystyrene
Up to 98% Glue Contact area
Will not delaminate after impact
Enhanced thermal qualities
LockBlock
398x68mm Finger Jointed Pine
Rails & Stiles
Rails : 60mm Finger Jointed Pine
Stiles : 30mm Finger Jointed Pine
Steel Insert
Custom designed and precision engineered
Anti corrosive pre galvanised steel
38.1 x 29.9mm with 1.6mm wall thickness for added rigidity
PLEASE NOTE: Stock doors are held with 3 and 4mm skins only. 4.75, 6 and 9mm skins available on request.
Rails & Stiles
Rails : 60mm Finger Jointed Pine
Stiles : 30mm Finger Jointed Pine
Lockblock
398x68mm Finger Jointed Pine
EPS Core
High Density Solid Core Polystyrene
Up to 98% Glue Contact area
Will not delaminate after impact
Enhanced thermal qualities
Rails & Stiles
Rails : 60mm Finger Jointed Pine
Stiles : 30mm Finger Jointed Pine
Lockblock
398x68mm Finger Jointed Pine
EPS Core
High Density Solid Core Polystyrene
Up to 98% Glue Contact area
Will not delaminate after impact
Enhanced thermal qualities
Steel Insert
Custom designed and precision engineered
Anti corrosive pre galvanised steel
38.1 x 29.9mm with 1.6mm wall thickness for added rigidity
Full Details
Base material from New Zealand steel
Precision manufactured to 38.1 x 29.9mm, with 1.6mm wall thickness for added rigidity. Pre Galvanised for clean finish.
Z250 - 275 (Zinc content weight)
G250 grade material (NZ steel specification)
100 percent NZ Made
ISO9000 Accredited Manufacturer
Steel 1
Steel Insert High Density EPS Solid Core Polystyrene
Steel 2
Steel Insert High Density EPS Solid Core Polystyrene
PLEASE NOTE: Stock doors are held with 4mm skins only. 3, 4.75, 6 and 9mm skins available on request.
